Rayfast Now Stocking TE Deutsch Autosport Connectors
See the full range below
DEUTSCH ASDD Series Connectors
TE's DEUTSCH ASDD connector is a high-density and high-performance connector, available in 8 Shell sizes.
The DEUTSCH ASDD series connectors are next generation connectors offering high-density and high-performance - a revolution in connector design. It allows for a savings of two (2) shell sizes relative to regular autosport planforms. The DEUTSCH ASDD series connectors are lightweight with almost double the number of contacts compared with the regular autosport range equivalent shell size. With its conductive black zinc nickel, its interfacial wire sealing, and its bonded and sealed insert preventing moisture ingress, the DEUTSCH ASDD series connectors are built to withstand harsh environments.
- Eight shell sizes
- Very lightweight
- Almost double the number of contacts compared with the regular autosport range equivalent shell size
- Integral screen
- Conductive black zinc finish
- Built to withstand autosport harsh environments
- Engine Control Units
- Gearbox Control Units
- Data Loggers
- General Data System Requirements
DEUTSCH ASDD Series connectors from TE Connectivity (TE) have been developed to bring together high density and high performance, inline with racing teams using smaller wire sizes.
The AS Double Density range allows almost double the number of contacts to be packaged in the same shell as compared to the standard AS Series connectors.
- Operating Temperatures: -55°C to +170°C
- Durability: 500 mating cycles
Materials
- Shell: high strength aluminum alloy, black zinc finish
- Insert: thermoplastic
- Seals: fluorinated silicone
- Contacts: gold plated copper alloy
Electrical
- Dielectric Withstanding Voltage: 750V
- Contact Current Rating (Max.): 3 Amps
DEUTSCH Autosport Double Density (ASDD) Series connectors from TE Connectivity (TE) have been developed to bring together high density and high performance, in line with racing teams using smaller wire sizes.
The ASDD connector range allows almost double the number of contacts to be packaged in the same shell as compared to the standard Autosport Series connectors.
- Operating Temperatures: -55°C to +170°C
- Durability: 500 mating cycles
Materials
- Shell: high strength aluminum alloy, black zinc finish
- Insert: thermoplastic
- Seals: fluorinated silicone
- Contacts: gold plated copper alloy
Electrical
- Dielectric Withstanding Voltage: 750V
- Contacts Current Rating (Max.): 3 Amps
DEUTSCH ASHD Series Connectors
TE's DEUTSCH ASHD Series Connectors are designed for high-power race car needs.
The Heavy Duty (HD) DEUTSCH ASHD series connectors are designed for high-power race car needs such as battery, alternator, Kinetic Energy Recovery System (KERS), and starter-motor applications. They feature a compact design, are environmentally-sealed, and extremely resistant to vibration. With operating temperatures up to 150°C and the ability to accommodate common sizes of cable, DEUTSCH ASHD series connectors give engine applications the winning edge.
Expanding our range of DEUTSCH ASHD series connectors, the new 3-way version is designed for 3-phase electric motors or generators to meet the growing need of hybrid racecars. The connectors use three 4 AWG contacts for power and two 20 AWG signal contacts for a safety loop.
- Operating Temperatures: -55°C to +175°C
- Durability: 500 mating cycles
Materials
- Shell: High-strength aluminum alloy, black zinc finish
- Insert: Thermoplastic
- Seals: Fluorinated silicone
- Contacts: Gold-plated copper
Electrical
- Dielectric Withstanding Voltage: Current leakage less than 2 mA
- at 1500 VAC
- Contact Current Rating (Max.)
- 4 AWG Contact: 200 A
- 20 AWG Contact: 7.5 A
- Autosport design
- Positive locking coupling mechanism for excellent vibration resistance
- Environmentally sealed
- Weight savings
- Lower weight alternative to 4-way connectors
- Safe handling
- Size 20 signal contacts designed for a safety loop application
- Early Break/Late Mate on signal contacts for safety
- Compatible
- Uses existing ASHD shell for easy integration/replacement
- Uses existing ASHD pin and socket contacts for power and signal
- Accommodates cable from 16 mm2 to 35 mm2 in diameter
- Minimum space envelope
- Resistant to vibration
- Suitable for battery, alternator and starter-motor applications
- Kinetic Energy Recovery System (KERS)
- Starter-motor applications
Extensive Stock Profile
Ready for fast dispatch
DEUTSCH AS Hermetic Series Connectors
TE's DEUTSCH AS Hermetic Series Connectors are designed for applications where leak at risk is at its most extreme.
The DEUTSCH AS Hermetic series connector is designed for applications where sealing integrity is required, such as fuel and pressurized systems. With the aluminum hermetic range, the DEUTSCH AS Hermetic series connectors enable weight reduction by 60% in a safety critical environment and allow race teams to refine weight distribution which is critical for success to find that last 10th of a second in lap time. The Hermetic ranges include AS Micro Hermetic series, AS Micro Hermetic Jam-nut series, the AS Hermetic Fuel Tank series, and the Aluminum Hermetic Fuel Tank series.
TE Connectivity (TE)'s dedicated autosport team has developed a new technique to manufacture the safety-critical hermetic fuel tank connectors in aluminum, offering a weight savings of 60% on the standard DEUTSCH stainless steel version.
This cutting-edge manufacturing allows race teams to refine weight distribution which is critical for success to find that last 10th of a second in lap time.
- Operating temperatures: -55°C to +175°C
- Durability: 500 mating cycles
Materials
- Shell and Nut: aluminum
- Insert: glass / elastomer
- Seals: fluorosilicone elastomer
- Contacts: copper berylium
Electrical
- Dielectric Withstanding Voltage: 1500V
- Contacts Current Rating (Max.): 13Amps
- Insulation Resistance > 5000Mohms
- Selection of contact arrangements to accommodate pumps and sensors
- Aluminum shell and nut
- Fuel immersible specification o-ring for enhanced fluid resistance
- Integral potting cup, rear accessory thread and external boot termination feature
- Glass seal can withstand pressure differentials of 1000psi without loss of electrical performance or fluid leakage
- 60% weight reduction in comparison with DEUTSCH standard stainless steel connector
- Designed for fuel cell walls
Hermetic connectors are designed to help prevent ingress of air, gases, and other liquids from entering the vacuum-sealed connector in extremely harsh environments. They can withstand high pressures of 10,000 psi or more, which helps ensure a stable pressure differential on both sides of the assembly. Most hermetic connectors are glass sealed as the glass creates a rigid form that the metal shell can compress against; this compression creates the hermetic seal. The glass supports and is bonded to the contacts. They are also made of durable materials such as stainless steel, glass, and Nickel iron. These connectors must withstand extreme temperature variations, ranging from -100°C to 200°C. They must also be able to resist damaging vibration. Hermetic connectors are most commonly used in military, offshore, commercial, and industrial operations.
DEUTSCH AS MicroLITE Series Connectors
TE's DEUTSCH AS MicroLITE Series Connectors offer easy installation and ultra-compact designs.
Offering easy installation and ultra-compact designs to deliver maximum performance in minimum space to help professional race teams take the lead, the DEUTSCH AS MicroLITE Series Connectors satisfy the demand for lower weight and smaller size with increased performance. All DEUTSCH AS MicroLITE Series Connectors feature a high-strength aluminum shell with conductive black zinc finish, vibration tolerance, and resistance to most fluids used in autosport applications.
- 5 size #23 contacts
- Positive locking coupling mechanism
- Scoop proof interface
- Conductive black zinc finish
- Compact design
- Easy installation
- Built to withstand harsh environments
- For sensor applications
WE ARE READY!
DEUTSCH AS Standard Series Connectors
TE's DEUTSCH AS Standard Series Connectors offer weight- and space-savings over standard military designs.
DEUTSCH AS Connectors are market leaders, chosen by many autosport racing teams as reliable, lightweight, and technologically advanced. As the original autosport dedicated range of connectors, the DEUTSCH AS Standard Series was designed specifically for the professional racing industry. DEUTSCH AS Connectors offer weight- and space-savings over standard military designs and are available in a wide variety of options, with medium- and high-density arrangements up to 128 ways.
- High density arrangements
- Filter version
- Optical fiber version
- Hermetic version
- Conductive black zinc finish
- Interfacial wire sealing
- Large application choices
- Built to withstand harsh environments
DEUTSCH AS MICRO XTRALITE Series Connectors
TE's DEUTSCH AS MICRO XTRALITE Series Connectors are designed to offer smaller and lighter wiring for three, five, and six wires in autosport applications.
With their ultra-compact design, the DEUTSCH AS MICRO XTRALITE series connectors offer racing teams the smallest, lightest package for three, five, and six wires. 6-way is the shortest, lightest AS connector for six wires, offering a solution where space is most restrictive.
- Minimum space envelope
- 3 Size #22 contacts / 5 Size #24 contacts / 6 Size #24 contacts
- Positive locking coupling mechanism
- Suitable for blind mating
- Scoop-proof interface
- Boot termination feature
- Conductive black zinc finish
- Interfacial wire sealing
- Bonded and sealed insert to prevent moisture ingress
- Data acquisition
Order now for the 2024 Season
DEUTSCH ASU Series Connectors
TE's DEUTSCH ASU series connector is a solution where space and weight are restricted for 3 and 5 wires.
With its ultra-compact design, DEUTSCH ASU Series Connectors — DEUTSCH AS UltraLITE HE and DEUTSCH AS Micro UltraLITE HE Connectors — offer racing teams a small, light package for three and five wires. These connectors offer a solution where space is restrictive and weight crucial.
- smaller alternative to AS MicroLITE (ASL) HE series
- 17% smaller coupling ring than ASL
- 30% lighter than ASL (mated pair)
- 5x AWG24 contacts and 3x AWG22 contacts
- conductive black zinc finish
- interfacial wire sealing
- bonded and sealed insert to help prevent moisture ingress
DEUTSCH ASC Series Connectors
TE's DEUTSCH ASC Series is a composite Connector aimed at wire connections and data transmission for autosport, marine and aerospace applications.
Made as one unit in a rugged thermoplastic housing, the DEUTSCH AS Composite Connector Series is aimed at wire connections and data transmission for applications where resistance to vibration is crucial, such as engine data, gearboxes, chassis, temperature, pressure, vibration, oil level, and timing systems sensors.
- Rugged thermoplastic housing
- Bondable with suitable adhesive in different configurations
- Cable-tie slot for security
- Mounting inline connections designed to fit 3.6mm wide cable-tie
- Close stacking possible with locating sides and bottom
Brochures
TE DEUTSCH AUTOSPORT Brochure
Download the full TE DEUTSCH Autosport Brochure here.
TE DEUTSCH AUTOSPORT Technical Manual
Download the full TE DEUTSCH Technical Manual here.