RF CONTACTS
AS12 RF
Designed for use in MIL-DTL-38999 compatible with MIL-C- 39029/102 and 103 designs. Exceptional performance from DC to 12.4 GHZ
AS16 RF
Designed for use in MIL-DTL-38999 compatible with MIL-C-39029/102 and 103 designs. Exceptional performance from DC to 2 GHz
RF CONNECTORS
MBX, MFBX, MMBX
For direct board to board connection compensating for mis alignment with an Axial float of +/- 1.2mm. They provide a best in class board to board distance of 6.7mm. With a the ability to handle high power requirements of up to 260 W. All with the advantage of blind mateability.
SMP Connectors
Designed for applications up to 40 GHz and where MIL Spec is required. These are qualified for Defence and space flight applications.
SMPM Connectors
Designed for applications up to 65 GHz where MIL-SPEC qualification is required for Defence and space flight applications. Also offered is the unique Bend to the End cable form.
SMPM-T
The smallest open source connector available meets MIL-STD-348. With a 5mm centreline to centreline spacing and frequencies up to 65 GHz. Also available with bend to the end variants.
MMCX
Ideal for use in applications up to 6 GHz with a snap fit mechanism. Ideal for surface mounting and have low RF leakage. Suitable for Re Flow soldering for impedance matching and signal screening.
MCX
A micro miniature connector for applications up to 6 GHz with compliance to CECC 22220. Ideal for applications including Telecoms, GPS and Test and Measurement.
MMPX
A broadband connector DC to 67 GHz with a pitch of 5.08mm. The snap on mechanism is very robust and is ideal for assemblies both flex and semi rigid cable options.
SMB
The SMB series is similar to the SMC series with the key difference being the coupling mechanism. With the SMB being a snap lock and the SMC being threaded. The SMB is suitable up to a frequency of 4GHz.
SMC
A sub miniature connector with a screw coupling mechanism. These are suitable up to 10 GHz.
NEX 10
A low PIM ( Passive Intermodulation) connector with a high return loss. With high performance to 20 GHz and designed particularly for Cell site applications. Other features such as blind mate make it suitable for board to board and test and measurement applications.
SSMA
This series is a sub miniature stainless steel and is 30% smaller than a standard SMA connector. Suitable for frequencies up to 60 GHz in an extended range. They conform to MIL-PRF-39012 and MIL-STD-348.
SMA
An industry standard connector designed for frequencies up to 18 GHz with an extended range to 26.5 GHz. An ideal solution for telecoms and test and measurement applications.
PC 3.5
These are precision connectors for microwave applications for frequencies up to 26.5 GHz. They are suitable for semi rigid cable and are inter mateable with SMA and SK(2.92mm connectors.
SK (2.92mm standard)
These are precision connectors for microwave applications up to 40 GHz. They are inter-mateable with the SMA and PC3.5 connectors. They have a shortened male pin to ensure a non destructive mating process. Â
PC 1.85
Precision connectors for microwave applications up to 67 GHz. This series is inter-mateable with the PC 1085 and PC 2.4 series. They have excellent performance combined with semi rigid and semi flexible cable.
Series 1.0 / 2.3 inserts
These inserts confirm to DIN41626 pattern M. They have a slde on coupling mechanism and are full crimp cable entry. Suitable for applications up to 4 GHz
QLA 00
Sub miniature connectors with a quick latch coupling mechanism. They are suitable for applications up to 1.4 GHz.
BMA series
A blind mate connector for microwave applications up to 18 GHz and allow for axial mis alignment with the outer contact of the jack.
QMA
A quick mate version of the standard SMA optimised for up to 6 GHz and an extended range to 18 GHz. The interface has similar performance to the SMA with a faster and safer coupling.
QMA Extreme
The QMA connector with the inclusion of waterproof and salt water protection. Rated to IP68 with high corrosion resistance and the benefits of quick coupling.
QN
The standard range performs to 6 GHz with an extended variant covering up to 11 GHz. The interface is a quick mate version of an industry standard N type.
QN Extreme
This is the QMA connector with added benefits of being rated to IP67. Its easy to install and has excellent PIM performance.
BNC
A popular standard connector with a bayonet coupling mechanism. With frequencies up to 4 GHz. Available are 50 ohm and 75 ohm variants.
TNC
Threaded interface connectors applicable up to 11 GHz with both 50 ohm and 75 ohm variants available. Ideal for high vibration loads.
SHV
Safe High Voltage connectors, providing secure handling of the centre contact. Suitable for voltages up to 5kV or 3.5 kV rms, Designed for nuclear environments or test and measurement systems.
MHV
Miniature High Voltage suitable up to 5kV test voltage and a working voltage to 1.6kV rms. Suitable for applications to 300 MHz
N
Available as 50 Ohm and 75 Ohm and an extended frequency range to 18 GHz. Available for Semi rigid, Flexible and corrugated copper cables.
4.3-10
A low PIM ( Passive Intermodulation) with both weight and compactness advantage. Available as screw mate and quick lock. Ideal for telecoms base stations and distributed antenna systems.
7/16
A rugged connector with screw lock and applicable applications to 7.5 GHz. Suitable for High PIM and and High power applications within base station transmitters.
Also Available
TNC Reverse Polarity
SMA Reverse Polarity
CUT OFF FREQUENCY CHART
Contact Our RF Specialist
Martin Jarvis
Key Account Manager & RF Lead